Description Of Soap Bar Cutter

Description Of Soap Bar Cutter:

1. This kind of Soap Cutters For Laundry Bar can cut the soap block into strip one time, according to the thickness/width/size of soap cut into the appropriate size of the block. (size can be adjusted by the clearance of the cutter).

2. Can be big board soap by manual pushing, a knife to make it into strip soap, then loosen the clearance cutter fixed screw on both sides to change different cutter knife, before the cut soap bars, across the flat to put on the soap.

3. Pull (lever forward valve cylinder introduced. Soap can be cut into flake. (required specifications of the soap, can change the cutter)

4. As the machine is driven by pneumatic, so you need to connect it with an air compressor separately first.

5.Place the Soap Cutting Machine on a flat surface, set the cutting width as you required in advance.

6. Then Put block soap bar onto the machine working table next by the Baffle,  start the machine by pressing the button.